Notion only has one power button. If Notion has a very low battery, you'll need to plug in the charger. To turn Notion on, press and hold the power button for two (2) seconds.
Notion 2 may take a few minutes to power up. When Notion 2 has finished starting the OS, the Status LED (small LED on the right side of the power button) will light up.
If your device is unplugged and ready to go, the status LED is solid white.
When Notion 2 is really low on battery and you plug in the charger, Notion 2 will automatically begin to start the OS and begin charging. Notion 2 may automatically shut down to let the battery charge a bit more.
If the power LED continues to flash, unplug, and then replug the charger and immediately hold the power button for six seconds. The power LED and status LED should both be off now. Let the device charge up for 10 minutes before powering on again.
Press and hold the power button for two seconds for a safe shutdown.
The status LED with turn red for about 60 seconds.
If the LEDs stay on for more than a minute, you can perform a hard shutdown by holding the power button for six seconds.
It's recommended to perform safe shutdowns instead of hard shutdowns.
If you wish to charge your Notion, please use the charger included. View your Notion's battery percentage on the Console. While charging, the Notion may not be worn or used.
Notion 2's status LED will show a pulsing yellow light while charging.
When Notion 2 is fully charged, the status LED will turn solid green.
These images are old. This article should be updated to include images for all three of your products. The crown doesn't power up like this.
how long does it take to charge the crown, been 12 hours and still showing red battery light, maybe I received a defective unit
got it, battery needs to be at 98% to show green LED
Please sign in to leave a comment.